1. Gmc Driver Download For Windows 10 64-bit
2. Gmc Driver Download For Windows 10 Pro
3. GMC Driver Download For Windows 10

Install all 5 driver packs below. Reason why so many to install is various ELM327's use different hardware chips. So one pack below should work. DRIVER PACK 1 Steps to install Driver Pack 1: If you have 64-bit Windows, double-click on: CP210xVCPInstallerx64; If you have 32-bit Windows, double-click on: CP210xVCPInstallerx86; DRIVER PACK 2. TVIT driver above includes RP1210 drivers. DLL Discovery: Sample registry code for PassThru DLL Discovery DT Tech2Win Driver 32-Bit: Tech2Win Driver for Drew Technologies devices. Uninstall old driver first. DT Tech2Win Driver 64-Bit: Tech2Win Driver for Drew Technologies devices. Uninstall old driver. Install the VX Driver MDI 1.2.0.0330.exe. After the installation is complete, go to the Windows Start menu and find the VX Driver MDI folder and application and open it. The VX Driver MDI software allows you to manage the interfaces currently connected to the PC. This is where you can verify if your hardware is connected, working.

(Cable should NOT be connected to your laptop yet. Only connect it when instructions say so.)

Windows XP, Vista, 7:

Bought ELM327 from Total Car Diagnostics?

• Install DRIVER PACK 3.

Didn't buy ELM327 from Total Car Diagnostics?

Install all 4 driver packs below. Reason why so many to install is various ELM327's use different hardware chips. So one pack below should work.

Gmc Driver Download For Windows 10 64-bit

—

If you bought ELM327 cable from elsewhere (clones, eBay, other manufacturers) then install all Driver Packs below, because they cover widest range of chip makers...

• DRIVER PACK 1
  Steps to install Driver Pack 1:
  
  • If you have 64-bit Windows, double-click on: CP210xVCPInstaller_x64
  • If you have 32-bit Windows, double-click on: CP210xVCPInstaller_x86
    

That's it!

Go to Step 2 below to test if everything is working ok...

Windows 8, 10:

Important: Any ZIP file below must be extracted specifically to Desktop. Then run the .exe file as Administrator. (Right-click > Run as Administrator)

Bought ELM327 from Total Car Diagnostics?

• Install DRIVER PACK 3.

Didn't buy ELM327 from Total Car Diagnostics?

Install all 5 driver packs below. Reason why so many to install is various ELM327's use different hardware chips. So one pack below should work.

• DRIVER PACK 1
  Steps to install Driver Pack 1:
  
  • If you have 64-bit Windows, double-click on: CP210xVCPInstaller_x64
  • If you have 32-bit Windows, double-click on: CP210xVCPInstaller_x86
    
• DRIVER PACK 4
  
• DRIVER PACK 5 ^{Most Important!}
  Steps to install Driver Pack 5:
  
  1. Please FIRST move the unextracted folder to your Desktop, else below #2 step won't show 'Install' option.
     
  2. Right-click on 'ser2pl' (icon has a little gear pic in it) and choose 'Install', as per below pic:
     
  3. Connect ELM327 cable to your laptop. Then...
     Go to: Control Panel » System » Device Manager » Ports (COM & LPT)
     You will likely see a yellow mark next to 'Prolific', like this:
     Right-click on it » Update Driver Software
     
  4. Click 'Browse my computer for driver software'.
     
  5. Select 'Let me pick from a list of device drivers on my computer'.
     
  6. UNcheck 'Show compatible hardware'.
     
  7. Select: Prolific driver version 3.3.2.102
     
  8. Install. That's it! The yellow triangle next to 'Prolific...' should be gone.

That's it!

Go to Step 2 below to test if everything is working ok...

(You can now CONNECT your ELM327 USB cable to any port on the laptop.)

Ok, we're almost ready to start scanning your vehicle.

First, let's ensure that everything is working fine!

Here's how...

Windows Vista/7/8/10: Control Panel » System » Device Manager

Windows XP: Control Panel » System » 'Hardware' tab » Device Manager

Notice any device with any one of the following names:

1. FT232R USB UART
2. Prolific USB-to-Serial...
3. USB Serial Port
4. USB2.0-Serial
5. Silicon Labs CP210x USB to UART Bridge

NONE of above devices should have a yellow mark () next to them.

If none of the above has a yellow mark, then congratulations! You're ready to begin scanning your car(s). Click here on how to connect to your car in the next 5 minutes...

If any one of above devices has a yellow mark, then:

1. Right-click on that device » Uninstall
2. Unplug cable
3. Restart PC
4. Download and unextract DRIVER PACK 6
5. Double-click on 'InstallUSB' to install
6. Connect cable to laptop. Yellow mark should now be gone. Success!
   If yellow mark is STILL not gone after doing 1-6 above, then do this:
   

   a) While cable is plugged in, right-click on device with the yellow mark.
   b) Click on: Update Driver Software
   c) Choose: Browser my computer for driver software
   d) Browse to and select folder where you unextracted Driver Pack 6. Make sure 'Include subfolders' is ticked ON.
   e) Click on: Next
   f) If you get RED warning, choose: Install this driver software anyway
   g) After it installs successfully, another yellow mark may appear under 'Other Device'. Eg:
   h) If g above is true, then do steps a-f for 'Unknown Device'. It may also show as 'COMx'.

Even DRIVER PACK 6 didn't help? Then likely it's a 'Code 10 error' next to 'Prolific USB-to-Serial' device. Click here to fix that.

Even 'Code 10 error' fix didn't help and yellow mark () is STILL not gone? Go to Troubleshooting below.

Step 1: Install your OBD2 software (if you don't have it — checkout TOAD OBD software). Do NOT launch it yet.

Step 2: Connect ELM327 USB to your computer and car's OBD port (usually underneat dashboard/steering wheel).

Gmc Driver Download For Windows 10 Pro

Step 3: Place the key in the ignition and turn it forward to 'ON' position. (Position where all dashboard lights are on. This is one position before engine starts.)

Step 4: Start your OBD diagnostic software. Click 'Connect', and it should auto-connect to your vehicle. That's it!

TIP: If you want maximum data reported from the car — turn on the engine.

Yes, you can safely drive the vehicle while ELM327 is plugged in and application is monitoring car's data. Keep eyes on the road at all times.

Common Solutions:

If you're unable to connect successfully to your car, then that's because of 2 reasons:

1. Your vehicle is notOBD2 compatible.
   
2. Random issues that can be fixed with below solutions...

Here are solutions in recommended order:

1. First check that ELM327 is physically working (not defunct). When you plug in the cable into a USB port, all the lights on ELM327 interface/device should flash. And then it'll return to 1 red light (power).
   Condition of a defunct ELM327 interface: All lights will not initially flash, and only red light will be on.
   
2. Restart computer (while keeping cable connected to laptop). Try again.
   
3. Plug USB into different physical port of your computer. Try again.
   
4. If all above solutions fail, then we will help you (only if you are Total Car Diagnostics customer). Here's all you need to do...
   

   Connect ELM327 USB cable into laptop. (Don't need to plug the other end to car)

   Step 1: Go to Control Panel.

   Windows Vista/7/8/10: Control Panel » System » Device Manager
   Windows XP: Control Panel » System » 'Hardware' tab » Device Manager

   Step 2: Expand 'Ports (COM & LPT)' and 'Other Devices'.

   Step 3: Take picture of the screen (Press 'Print Screen' key on the keyboard then paste into any graphics program. Or take shot with camera/phone.)

   Step 4:Contact us and attach the picture.

Free Software To Test If ELM327 is Working with Windows and Vehicle...

Step 1: Install EasyOBD. Do not launch it until Step 4 below.

Step 2: Connect ELM327 USB/Bluetooth to laptop and car.

Step 3: Turn on car ignition. (One step before engine turns on)

Step 4: Launch EasyOBD. It will automatically connect.

If first 5 lines are GREEN — then ELM327/Windows is 100% installed correctly. In this case, can get TOAD pro software.

If any of the first 5 lines are RED — then OBD2 scanner won't work on your car. Rather take it to mechanic.

GMC Driver Download For Windows 10

• ELM327 AT Commands: List of commands you can manually type into OBD software terminal.