Drivers Goldcut



Support > Software & Drivers

Goldcut

Driver Goldcut Windows 10

Cutting Plotters

Hi yes i installed the usb to serial driver that come with the usb cord i bought but that is it i think i need a driver for my plotter as it sends information to my plotter but the plotter doesnt do anything like its dead there is a red light that stays on it is on the reset button,i press test and it cuts me a perfect test so it is obveously working ok it just doesnt reconise the data going. GOLDCUT JK Series Driver For Windows XP 64-bit Free DOWNLOAD (Mirror #1) GOLDCUT JK Series Driver For Windows XP 64-bit Free DOWNLOAD (Mirror #1) Home. Therapy Services. Naughty Boy Full Movie Tamil 1080p. Jun 29, 2016 - More articles in GoldCut Vinyl Cutter Series. GoldCut Manual - Getting Started GoldCut Driver Download GoldCut Replacement Parts.

Software & Drivers

Go to the driver section : Windows driver
Go to the softwares (1) section : Controller, ROBO Master Pro, D-Cut Master
Go to the softwares (2) section : Cutting Master 4, Graphtec Pro Studio, Cutting Master 2, Cutting Master 3, Graphtec Studio
* FC9000, go to the product support page.
* CE7000, go to the product support page.
* CE7000-130AP, go to the product support page.
* CE LITE-50, go to the product support page.
* CE6000 PLUS, go to the product support page.
* FCX2000, go to the product support page.
* FCX4000, go to the product support page.

Drivers

Drivers Gold Cut Outs

Cutting PlottersWindows Driver
Windows
7
(32-bits Edition)
Windows
8.1
(32-bits Edition)
Windows
10
(32-bits Edition)
Windows
7
(64-bits Edition)
Windows
8.1
(64-bits Edition)
Windows
10
(64-bits Edition)
Cprrespon- ding model
CE6000-40
CE6000-60
CE6000-120
CE6000-120AMO
OPS662 (v3.80)OPS662 (v4.00)OPS662 (v3.80)OPS662 (v4.00)CE6000
CE6000-120APOPS628 (v10.20)OPS628 (v10.30)OPS628 (v10.20)OPS628 (v10.30)CE6000
FC8600-60
FC8600-75
FC8600-100
FC8600-130
FC8600-160
OPS662 (v3.80)OPS662 (v4.00)OPS662 (v3.80)OPS662 (v4.00)FC8600
FC2250-60
FC2250-120
FC2250-180
FC2250
FC4500-50
FC4510-60
FC4550-50
FC4500
CE2000-60
CE2000-120
OPS628 (v10.20)N/AOPS628 (v10.20)N/ACE2000
CE2000-120APCE2000
CE3000-40
CE3000-60
CE3000-120
CE3000
CE3000-120APCE3000
CE3000Mk2-60
CE3000Mk2-120
OPS662 (v3.00)N/AOPS662 (v3.00)N/ACE3000Mk2
CE5000-60
CE5000-120
OPS662 (v3.00)OPS662 (v3.00)CE5000
CE5000-120APOPS628 (v10.20)OPS628 (v10.20)CE5000
FC2231-60
FC2231-90
FC2321-EX
FC2232-60
FC2232-90
FC2232-EX
OPS628 (v10.20)N/AOPS628 (v10.20)N/AFC2230
FC2240-60
FC2240-120
FC2240-180
OPS662 (v3.00)N/AOPS662 (v3.00)N/AFC2240
FC3600-120OPS628 (v10.20)N/AOPS628 (v10.20)N/AFC3600
FC4200-50
FC4200-60
FC4210-60
OPS628 (v10.20)N/AOPS628 (v10.20)N/AFC4200
FC5100-75
FC5100-100
FC5100-130
FC5100-150
OPS628 (v10.20)N/AOPS628 (v10.20)N/AFC5100
FC5100A-75
FC5100A-100
FC5100A-130
FC5100A-150
FC5100
FC7000-75
FC7000-100
FC7000-130
FC7000-160
OPS662 (v3.00)N/AOPS662 (v3.00)N/AFC7000
FC7000Mk2-60
FC7000Mk2-75
FC7000Mk2-100
FC7000Mk2-130
FC7000Mk2-160
FC7000
FC8000-60
FC8000-75
FC8000-100
FC8000-130
FC8000-160
OPS662 (v3.00)OPS662 (v3.00)FC8000
FC612-09OPS628 (v10.20)N/AOPS628 (v10.20)N/AFC612

Driver Goldcut Jk Series

Notes/Explanations:

1.
On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
2.
On driver and software, the language is in English.
3.
On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.

Softwares

Cutting PlottersCutting Plotter ControllerROBO Master ProD-Cut Master
Windows
7 / 8.1
(32 & 64-bits Edition)
Windows
10
(32 & 64-bits Edition)
Windows
7
(32 & 64-bits Edition)
Windows
8.1 / 10
(32 & 64-bits Edition)
Windows
7
(32 & 64-bits Edition)
Windows
8.1 / 10
(32 & 64-bits Edition)
CE6000-40
CE6000-60
CE6000-120
CE6000-120AMO
OPS676 (v1.40B)N/AN/A
Firmware version 1.60 is required (CE6000 Firmware v2.61)
Manual for CE6000-40/60/120/120AMO (CE6000-UM-152-01)
CE6000-120APN/AN/AN/A
Firmware version v1.50 is required (CE6000-120AP Firmware v2.00)
User manual for CE6000-120AP (CE6000AP-UM-152-01)
FC8600-60
FC8600-75
FC8600-100
FC8600-130
FC8600-160
OPS675 (v1.50B)N/AN/A
FC2250-60
FC2250-120
FC2250-180
N/AN/AOPS639 (v2.12)N/A
FC4500-50
FC4510-60
FC4550-50
CE2000-60
CE2000-120
N/AN/AN/A
CE2000-120APN/AN/AN/A
CE3000-40
CE3000-60
CE3000-120
N/AN/AN/A
CE3000-120APN/AN/AN/A
CE3000Mk2-60
CE3000Mk2-120
N/AN/AN/A
CE5000-60
CE5000-120
OPS664 (v2.20B)OPS661 (v4.60)N/AN/A
CE5000-120APN/AN/AN/A
FC2231-60
FC2231-90
FC2321-EX
FC2232-60
FC2232-90
FC2232-EX
N/AN/AOPS639 (v2.12)N/A
FC2240-60
FC2240-120
FC2240-180
N/AN/AOPS639 (v2.12)N/A
FC3600-120N/AN/AN/A
FC4200-50
FC4200-60
FC4210-60
N/AN/AOPS639 (v2.12)N/A
FC5100-75
FC5100-100
FC5100-130
FC5100-150
N/AN/AN/A
FC5100A-75
FC5100A-100
FC5100A-130
FC5100A-150
N/AN/AN/A
FC7000-75
FC7000-100
FC7000-130
FC7000-160
OPS664 (v2.20B)N/AN/AN/A
FC7000Mk2-60
FC7000Mk2-75
FC7000Mk2-100
FC7000Mk2-130
FC7000Mk2-160
FC8000-60
FC8000-75
FC8000-100
FC8000-130
FC8000-160
OPS675 (v1.50B)N/AN/A
FC612-09N/AN/AOPS639 (v2.12)N/A

Notes/Explanations:

1.
On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
2.
On driver and software, the language is in English.
3.
On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
4.
On software, it is run in the WOW64 mode when the 64-bits Windows OS is used.

Softwares

Cutting PlottersCutting Master 4Graphtec Pro Studio
Windows
7 / 8.1 / 10
(32 & 64-bits Edition)
Macintosh
OS10.7 - 10.15
Windows
7 / 8.1 / 10
(32 & 64-bits Edition)
FC8600-60
FC8600-75
FC8600-100
FC8600-130
FC8600-160
Cutting Master 4
for Windows
Cutting Master 4
for Macintosh
Graphtec Pro Studio
for Windows
FC4500-50
FC4510-60
FC4550-50
Cutting Master 4
for Windows
Cutting Master 4
for Macintosh
Graphtec Pro Studio
for Windows
Cutting PlottersCutting Master 2Cutting Master 3Graphtec Studio
Windows
7/ 8.1
(32 & 64-bits Edition)
Windows
10
(32 & 64-bits Edition)
Macintosh
OS10.4 - 10.10
Windows
7/ 8.1/ 10
(32 & 64-bits Edition)
Macintosh
OS10.5 -10.11
macOS 10.12
Windows
7/ 8.1/ 10
(32 & 64-bits Edition)
Macintosh
OS10.6 -10.15
CE6000-40
CE6000-60
CE6000-120
CE6000-120AMO
C-Master2(W) (v2.00)TBDC-Master2(M) (v1.99)Cutting Master 3
for Windows
Cutting Master 3
for Macintosh
Graphtec Studio
for Windows
Graphtec Studio
for Macintosh
CE6000-120APN/AN/AN/A
FC8600-60
FC8600-75
FC8600-100
FC8600-130
FC8600-160
C-Master2(W) (v2.00)TBDC-Master2(M) (v1.99)Cutting Master 3
for Windows
Cutting Master 3
for Macintosh
Graphtec Studio
for Windows
Graphtec Studio
for Macintosh
Firmware version 2.10 or later is required (FC8600 Firmware v3.10)
FC2250-60
FC2250-120
FC2250-180
C-Master2(W) (v2.00)TBDC-Master2(M) (v1.99)Cutting Master 3
for Windows
Cutting Master 3
for Macintosh
Graphtec Studio
for Windows
Graphtec Studio
for Macintosh
Firmware version 3.90 or later is required (FC2250 Firmware v4.50)
FC4500-50
FC4510-60
FC4550-50
C-Master2(W) (v2.00)TBDC-Master2(M) (v1.99)Cutting Master 3
for Windows
Cutting Master 3
for Macintosh
Graphtec Studio
for Windows
Graphtec Studio
for Macintosh
Firmware version 1.92 or later is required (FC4500 Firmware v2.70)
CE2000-60
CE2000-120
N/AN/AN/A
CE2000-120APN/AN/AN/A
CE3000-40
CE3000-60
CE3000-120
N/AN/AN/A
CE3000-120APN/AN/AN/A
CE3000Mk2-60
CE3000Mk2-120
N/AN/AN/A
CE5000-60
CE5000-120
C-Master2(W) (v2.00)TBDC-Master2(M) (v1.99)Cutting Master 3
for Windows
Cutting Master 3
for Macintosh
Graphtec Studio
for Windows>
Graphtec Studio
for Macintosh
When current firmware is previous of version 3.80, version 3.90 is required (CE5000 Firmware v4.00)
When current firmware is version 5.00 or later, version 6.20 is required (CE5000 Firmware v6.40)
CE5000-120APN/AN/AN/A
FC2231-60
FC2231-90
FC2321-EX
FC2232-60
FC2232-90
FC2232-EX
N/AN/AN/A
FC2240-60
FC2240-120
FC2240-180
N/AN/AN/A
FC3600-120N/AN/AN/A
FC4200-50
FC4200-60
FC4210-60
N/AN/AN/A
FC5100-75
FC5100-100
FC5100-130
FC5100-150
N/AN/AN/A
FC5100A-75
FC5100A-100
FC5100A-130
FC5100A-150
N/AN/AN/A
FC8000-60
FC8000-75
FC8000-100
FC8000-130
FC8000-160
C-Master2(W) (v2.00)TBDC-Master2(M) (v1.99)Cutting Master 3
for Windows
Cutting Master 3
for Macintosh
Graphtec Studio
for Windows
Graphtec Studio
for Macintosh
Firmware version 3.10 or later is required (FC8000 Firmware v3.50)
FC612-09N/AN/AN/A

Notes/Explanations:

1.
On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
2.
On driver and software, the language is in English.
3.
On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
4.
On software, it is run in the WOW64 mode when the 64-bits Windows OS is used.
5.
In plug-in software Cutting Master 2 and Cutting Master 3, new version will not be released even if the OS or application software is updated. It is recommended using plug-in software Cutting Master 4 corresponded to new OS or application software if possible.