Support > Software & Drivers
Driver Goldcut Windows 10
Cutting Plotters
Hi yes i installed the usb to serial driver that come with the usb cord i bought but that is it i think i need a driver for my plotter as it sends information to my plotter but the plotter doesnt do anything like its dead there is a red light that stays on it is on the reset button,i press test and it cuts me a perfect test so it is obveously working ok it just doesnt reconise the data going. GOLDCUT JK Series Driver For Windows XP 64-bit Free DOWNLOAD (Mirror #1) GOLDCUT JK Series Driver For Windows XP 64-bit Free DOWNLOAD (Mirror #1) Home. Therapy Services. Naughty Boy Full Movie Tamil 1080p. Jun 29, 2016 - More articles in GoldCut Vinyl Cutter Series. GoldCut Manual - Getting Started GoldCut Driver Download GoldCut Replacement Parts.
Software & Drivers
Go to the driver section : Windows driver
Go to the softwares (1) section : Controller, ROBO Master Pro, D-Cut Master
Go to the softwares (2) section : Cutting Master 4, Graphtec Pro Studio, Cutting Master 2, Cutting Master 3, Graphtec Studio
* FC9000, go to the product support page.
* CE7000, go to the product support page.
* CE7000-130AP, go to the product support page.
* CE LITE-50, go to the product support page.
* CE6000 PLUS, go to the product support page.
* FCX2000, go to the product support page.
* FCX4000, go to the product support page.
Drivers
Drivers Gold Cut Outs
| Cutting Plotters | Windows Driver | ||||||
|---|---|---|---|---|---|---|---|
| Windows 7 (32-bits Edition) | Windows 8.1 (32-bits Edition) | Windows 10 (32-bits Edition) | Windows 7 (64-bits Edition) | Windows 8.1 (64-bits Edition) | Windows 10 (64-bits Edition) | Cprrespon- ding model | |
| CE6000-40 CE6000-60 CE6000-120 CE6000-120AMO | OPS662 (v3.80) | OPS662 (v4.00) | OPS662 (v3.80) | OPS662 (v4.00) | CE6000 | ||
| CE6000-120AP | OPS628 (v10.20) | OPS628 (v10.30) | OPS628 (v10.20) | OPS628 (v10.30) | CE6000 | ||
| FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160 | OPS662 (v3.80) | OPS662 (v4.00) | OPS662 (v3.80) | OPS662 (v4.00) | FC8600 | ||
| FC2250-60 FC2250-120 FC2250-180 | FC2250 | ||||||
| FC4500-50 FC4510-60 FC4550-50 | FC4500 | ||||||
| CE2000-60 CE2000-120 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | CE2000 | ||
| CE2000-120AP | CE2000 | ||||||
| CE3000-40 CE3000-60 CE3000-120 | CE3000 | ||||||
| CE3000-120AP | CE3000 | ||||||
| CE3000Mk2-60 CE3000Mk2-120 | OPS662 (v3.00) | N/A | OPS662 (v3.00) | N/A | CE3000Mk2 | ||
| CE5000-60 CE5000-120 | OPS662 (v3.00) | OPS662 (v3.00) | CE5000 | ||||
| CE5000-120AP | OPS628 (v10.20) | OPS628 (v10.20) | CE5000 | ||||
| FC2231-60 FC2231-90 FC2321-EX FC2232-60 FC2232-90 FC2232-EX | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC2230 | ||
| FC2240-60 FC2240-120 FC2240-180 | OPS662 (v3.00) | N/A | OPS662 (v3.00) | N/A | FC2240 | ||
| FC3600-120 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC3600 | ||
| FC4200-50 FC4200-60 FC4210-60 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC4200 | ||
| FC5100-75 FC5100-100 FC5100-130 FC5100-150 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC5100 | ||
| FC5100A-75 FC5100A-100 FC5100A-130 FC5100A-150 | FC5100 | ||||||
| FC7000-75 FC7000-100 FC7000-130 FC7000-160 | OPS662 (v3.00) | N/A | OPS662 (v3.00) | N/A | FC7000 | ||
| FC7000Mk2-60 FC7000Mk2-75 FC7000Mk2-100 FC7000Mk2-130 FC7000Mk2-160 | FC7000 | ||||||
| FC8000-60 FC8000-75 FC8000-100 FC8000-130 FC8000-160 | OPS662 (v3.00) | OPS662 (v3.00) | FC8000 | ||||
| FC612-09 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC612 | ||
Driver Goldcut Jk Series
Notes/Explanations:
- 1.
- On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
- 2.
- On driver and software, the language is in English.
- 3.
- On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
Softwares
| Cutting Plotters | Cutting Plotter Controller | ROBO Master Pro | D-Cut Master | |||
|---|---|---|---|---|---|---|
| Windows 7 / 8.1 (32 & 64-bits Edition) | Windows 10 (32 & 64-bits Edition) | Windows 7 (32 & 64-bits Edition) | Windows 8.1 / 10 (32 & 64-bits Edition) | Windows 7 (32 & 64-bits Edition) | Windows 8.1 / 10 (32 & 64-bits Edition) | |
| CE6000-40 CE6000-60 CE6000-120 CE6000-120AMO | OPS676 (v1.40B) | N/A | N/A | |||
| Firmware version 1.60 is required (CE6000 Firmware v2.61) Manual for CE6000-40/60/120/120AMO (CE6000-UM-152-01) | ||||||
| CE6000-120AP | N/A | N/A | N/A | |||
| Firmware version v1.50 is required (CE6000-120AP Firmware v2.00) User manual for CE6000-120AP (CE6000AP-UM-152-01) | ||||||
| FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160 | OPS675 (v1.50B) | N/A | N/A | |||
| FC2250-60 FC2250-120 FC2250-180 | N/A | N/A | OPS639 (v2.12) | N/A | ||
| FC4500-50 FC4510-60 FC4550-50 | ||||||
| CE2000-60 CE2000-120 | N/A | N/A | N/A | |||
| CE2000-120AP | N/A | N/A | N/A | |||
| CE3000-40 CE3000-60 CE3000-120 | N/A | N/A | N/A | |||
| CE3000-120AP | N/A | N/A | N/A | |||
| CE3000Mk2-60 CE3000Mk2-120 | N/A | N/A | N/A | |||
| CE5000-60 CE5000-120 | OPS664 (v2.20B) | OPS661 (v4.60) | N/A | N/A | ||
| CE5000-120AP | N/A | N/A | N/A | |||
| FC2231-60 FC2231-90 FC2321-EX FC2232-60 FC2232-90 FC2232-EX | N/A | N/A | OPS639 (v2.12) | N/A | ||
| FC2240-60 FC2240-120 FC2240-180 | N/A | N/A | OPS639 (v2.12) | N/A | ||
| FC3600-120 | N/A | N/A | N/A | |||
| FC4200-50 FC4200-60 FC4210-60 | N/A | N/A | OPS639 (v2.12) | N/A | ||
| FC5100-75 FC5100-100 FC5100-130 FC5100-150 | N/A | N/A | N/A | |||
| FC5100A-75 FC5100A-100 FC5100A-130 FC5100A-150 | N/A | N/A | N/A | |||
| FC7000-75 FC7000-100 FC7000-130 FC7000-160 | OPS664 (v2.20B) | N/A | N/A | N/A | ||
| FC7000Mk2-60 FC7000Mk2-75 FC7000Mk2-100 FC7000Mk2-130 FC7000Mk2-160 | ||||||
| FC8000-60 FC8000-75 FC8000-100 FC8000-130 FC8000-160 | OPS675 (v1.50B) | N/A | N/A | |||
| FC612-09 | N/A | N/A | OPS639 (v2.12) | N/A | ||
Notes/Explanations:
- 1.
- On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
- 2.
- On driver and software, the language is in English.
- 3.
- On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
- 4.
- On software, it is run in the WOW64 mode when the 64-bits Windows OS is used.
Softwares
| Cutting Plotters | Cutting Master 4 | Graphtec Pro Studio | |
|---|---|---|---|
| Windows 7 / 8.1 / 10 (32 & 64-bits Edition) | Macintosh OS10.7 - 10.15 | Windows 7 / 8.1 / 10 (32 & 64-bits Edition) | |
| FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160 | Cutting Master 4 for Windows | Cutting Master 4 for Macintosh | Graphtec Pro Studio for Windows |
| FC4500-50 FC4510-60 FC4550-50 | Cutting Master 4 for Windows | Cutting Master 4 for Macintosh | Graphtec Pro Studio for Windows |
| Cutting Plotters | Cutting Master 2 | Cutting Master 3 | Graphtec Studio | ||||
|---|---|---|---|---|---|---|---|
| Windows 7/ 8.1 (32 & 64-bits Edition) | Windows 10 (32 & 64-bits Edition) | Macintosh OS10.4 - 10.10 | Windows 7/ 8.1/ 10 (32 & 64-bits Edition) | Macintosh OS10.5 -10.11 macOS 10.12 | Windows 7/ 8.1/ 10 (32 & 64-bits Edition) | Macintosh OS10.6 -10.15 | |
| CE6000-40 CE6000-60 CE6000-120 CE6000-120AMO | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
| CE6000-120AP | N/A | N/A | N/A | ||||
| FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
| Firmware version 2.10 or later is required (FC8600 Firmware v3.10) | |||||||
| FC2250-60 FC2250-120 FC2250-180 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
| Firmware version 3.90 or later is required (FC2250 Firmware v4.50) | |||||||
| FC4500-50 FC4510-60 FC4550-50 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
| Firmware version 1.92 or later is required (FC4500 Firmware v2.70) | |||||||
| CE2000-60 CE2000-120 | N/A | N/A | N/A | ||||
| CE2000-120AP | N/A | N/A | N/A | ||||
| CE3000-40 CE3000-60 CE3000-120 | N/A | N/A | N/A | ||||
| CE3000-120AP | N/A | N/A | N/A | ||||
| CE3000Mk2-60 CE3000Mk2-120 | N/A | N/A | N/A | ||||
| CE5000-60 CE5000-120 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows> | Graphtec Studio for Macintosh |
| When current firmware is previous of version 3.80, version 3.90 is required (CE5000 Firmware v4.00) When current firmware is version 5.00 or later, version 6.20 is required (CE5000 Firmware v6.40) | |||||||
| CE5000-120AP | N/A | N/A | N/A | ||||
| FC2231-60 FC2231-90 FC2321-EX FC2232-60 FC2232-90 FC2232-EX | N/A | N/A | N/A | ||||
| FC2240-60 FC2240-120 FC2240-180 | N/A | N/A | N/A | ||||
| FC3600-120 | N/A | N/A | N/A | ||||
| FC4200-50 FC4200-60 FC4210-60 | N/A | N/A | N/A | ||||
| FC5100-75 FC5100-100 FC5100-130 FC5100-150 | N/A | N/A | N/A | ||||
| FC5100A-75 FC5100A-100 FC5100A-130 FC5100A-150 | N/A | N/A | N/A | ||||
| FC8000-60 FC8000-75 FC8000-100 FC8000-130 FC8000-160 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
| Firmware version 3.10 or later is required (FC8000 Firmware v3.50) | |||||||
| FC612-09 | N/A | N/A | N/A | ||||
Notes/Explanations:
- 1.
- On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
- 2.
- On driver and software, the language is in English.
- 3.
- On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
- 4.
- On software, it is run in the WOW64 mode when the 64-bits Windows OS is used.
- 5.
- In plug-in software Cutting Master 2 and Cutting Master 3, new version will not be released even if the OS or application software is updated. It is recommended using plug-in software Cutting Master 4 corresponded to new OS or application software if possible.