IR Monitor and IP Config
FLIR IP Config is used to determine and set the IP address of FLIR network cameras, typically the FLIR A3xx-series, FLIR AX8 or the FLIR A400/A700 smart cameras.
Older versions of IP Config are available for those who have trouble running 3.0 on their system. See the software downloads page for more details.
The FLIR Lepton® is a radiometric-capable LWIR camera solution that is smaller than a dime, fits inside a smartphone, and is one tenth the cost of traditional IR cameras. Using focal plane arrays of either 160x120 or 80x60 active pixels, Lepton easily integrates into native mobile-devices and other electronics as an IR sensor or thermal imager. Forward-looking infrared (FLIR) cameras, typically used on military and civilian aircraft, use a thermographic camera that senses infrared radiation.
FLIR IR Monitor can be used to set up and configure the A310 and A300 cameras. This tool should be used for configuration only and is not intended for continuous video streaming.
Drivers
When using the A310 on Windows machines, it is necessary do download the following drivers:
-->Answers others found helpful
PrintHello,
Flir Driving Camera
I'm trying to build the ros-drivers/flir_camera_driver package, however I have been running into the below error. I'm running Ubuntu 16.04 on an ARM64 system (Nvidia TX2). I have also tried building the ETH ASL fork of this driver with the same error as well as both of these on my desktop without any luck.
Would anyone have any ideas on what is going wrong/how I might fix it?
I've tried posting on the flir_camera_driver github page, however haven't been able to get any help yet there. Any help would be greatly appreciated as I'm quite stuck currently and have spent days trying to work this out.Thanks :)
Drivers Flir Cameras App
Comments
This looks me to like a linking error, in the CMakeLists I see a call for ${Spinnaker_LIBRARIES} in the linking for the library, but perhaps there's an issue with that library being installed altogether - I see the find_package fails silently. try changing quiet to REQUIRED and see if it fails on just finding the package
Hi Steve, thanks for the reply.I tried that, however I get the same error.I also tried uninstalling the Spinnaker SDK (https://flir.app.boxcn.net/v/Spinnake...) and cleaning/rebuilding. I get different errors without it installed, so I believe it is finding them.
I can run the 'spinview' program from the SDK install successfully and access the camera with that, however still having trouble getting the ros driver to build.
Hi Sk12, I have a similar problem trying to run the flir_camera_driver with my Chameleon 3 cameras. Did you find the solution? These is one of the errors:
Any help will be welcome!